Flexibles

HomeTraffic ControlConesSignsPostsBarricadesLightsContact UsLutesDelineators

FlexiblesFlexibles

Flexible Safety Zoning Co.
A Division of Nafisco, Inc.
808 Forestwood Dr - Romeoville, IL - 60446
Ph: 815-372-3300 Fax: 815-372-3315


Model EY 226 Shown

Model P 426 Shown

High Impact Ethylene Copolymer

An all purpose guide with Yellow or White reflectorized bands. Flexible, high impact, black tube. Unaffected by temperature extrems.

Fluorescent Red Orange "All Temperature" Ethylene Copolymer

High visibility fluorescent ethylene tube will not shatter in cold weather nor bow in hot.

Removable Surface Type Uses Snap in Wand

Male casting on wand threads easily into heavy duty aluminum base. Base cements to pavement with epoxy or anchor bolts. Tighten with spanner or pipe wrench.

Removable Below Surface Uses Snap in Wand

Male casting on wand threads into heavy duty aluminum base. Base cemented into pavement flush with surface. May be quickly removed. Thighten with spanner or pipe wrench.

Surface Type 1 Piece Unit

New glass filled black polycarbonate in round style. Wand attached to base with stainless steel hose clamp. Unit may be anchored to pavement with anchor bolts, epoxy or Bituminous.

SPECIFICATIONS

TO ORDER, SPECIFY:

WAND

Example:
"Black with Yellow Bands"

EY

BASE

Example:
"1 Piece Above Pavement"

4

HEIGHT

Example:
"26"

26

Order EY426

 

Standard Heights: 14" - 20" - 26" - 32" (Specials to 48") All heights approximate - tol. ± 3/4"
 

STANDARD TYPES OF WANDS

MATERIAL
DIMENSIONS
ASSEMBLY

Type E

BLACK
ETHYLENE
COPOLYMER
2-3/4" O.D.

Wall 1/8" ± 1/32"

Yellow (EY) or White (EW) top band of Scotchlite® Brand High Intensity Grade Sheeting 4" wide installed 2" down from top of wand.  Second band installed 2" down from first band. 14" wand has one band only.

Type P

FLUORESCENT
ORANGE
ETHYLENE
COPOLYMER
2-3/4" O.D.

Wall 1/8" ± 1/32"

One 1" band of reflective tape installed approximately 2" down from top of wand.

BASE CASTINGS

TYPE
200
300
2-3a
400
MATERIAL HIGH
TENSILE
ALUMINUM
HIGH
TENSILE
ALUMINUM
HIGH
TENSILE
ALUMINUM
GLASS
FILLED
POLY
CARBONATE
DIMENSIONS 6" dia.
1-3/4" high
4-3/4" dia.
2" high
4-3/4" dia.
2" high
5 " dia.
1-3/4" high
ASSEMBLY Threaded to accept the 2-3a male casing easily. Must be fastened to pavement by use of spikes, bolts or Epoxy cement. Threaded to accept the 2-3a male casing easily. Installed with cement below pavement surface. Epoxied to tube. Attached to wand by use of hose clamp. Must fasten to pavement by use of spikes, bolts, Epoxy cement or Bituminous.

TYPICAL FLEX-O-GUIDE BREAKDOWN

TERMS AND CONDITIONS OF SALE
The following is made in lieu of all warranties, express or implied: Neither seller nor manufacturer shall be liable for any injury, loss or damage, direct or consequential, arising out of the use of or the inability to use the product. Before using, user shall determine the suitability of the product for the intended use, and user assumes all risk and liability whatsoever in connection therewith.

A Division of Nafisco, Inc.
808 Forestwood Dr ● Romeoville, IL 60446 ● Telephone (815) 372-3300

 

Copyright © Nafisco, Inc. 2011